To ensure you are ordering the correct wiring harness please be sure to determine if you have the cutout or regulator. It is a common and costly mistake as wiring harnesses cannot be returned once they have been installed.
Voltage Regulators
- Have 3 terminals on one side & 1 terminal either on the other side or under the regulator.
- Cub mounts below the generator on governor housing, others mount on back of the light switch box or rear fuel tank support.
- Also note that “from the factory” regulators were never mounted on the generator.
- Other models’ regulators have 3 to 4 terminals.
Cut out Relays
- will have 2 terminals on one side and 1 terminal on the other and use a 4 position light switch with a field resistor (IHS950).
- Gas tractors mount on the generator & diesel tractors mount on the left radiator support.
- Other models’ cut outs have 2 terminals.
- If the control box is mounted on top of the generator it should be a cutout.