hood Archives - Antique Tractor Blog Skip to main content

New die cast chrome emblem

IHS1794Our new IHS1794 die cast, chrome plated hood ornament fits 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 4366, 4386, 4568, 4586, 4786, Hydros: 70, 86, 100, 186.

We recently contracted with a Harley Davidson supplier ensuring a top quality casting and finish. This part is sure to bring a smile to the face of any collector.

Order yours today!

Weekly Featured Products

IHS789 Air Cleaner Indicator / Gauge

Fits International: 766, 966, 1066, 1466, 1468, 1566, 1568, HYDRO 100, 4366, 4386, 4568, 4586 Replaces: 533991R1, 1341364C1

————————————————————————-

FDS487 Fuel Line Assembly

Fits Ford: NAA (1953-1954) Replaces: NCA9282C

————————————————————————-

JDS1075 Premium Carburetor Kit

  • Fits John Deere: B, BN, BNH, BW, BWH
  • 39 PIECE KIT INCLUDES:THROTTLE PLATE, THROTTLE SHAFT, BOWL NUT SPRING, THROTTLE SHAFT BUSHINGS & PACKING, BRASS PLUGS, FLOAT PIN, BUTTERFLY SCREWS, GASKETS, STAINLESS NEEDLE & SEAT, DRAIN PETCOCK, BAFFLE (BOWL/VENT)
  • Carb MFG: FITS FOLLOWING MARVEL SCHEBLER CARBURETORS: DLTX67, DLTX73
  • Replaces: THROTTLE SHAFT ASSY-AR10058R, NEEDLE & SEAT-AR10077R, THROTTLE BUSHINGS-R10140R, THROTTLE DISC-R10080R, RETAINING SPRING-R10078R, DRAIN PETCOCK-AR10075R, WASHER-R10147R, THROTTLE SHAFT PLUG-R10151R, BRASS PLUGS-R10067R, BRASS PLUG-R10045R, BRASS PLUG-R10148R, BRASS PLUG-R10041R, BAFFLE BOWL VENT-R10163R, BRASS PLUG-R10150R, BRASS PLUG-R10149R, FLOAT PIVOT PIN-R10049R, SCREWS-21H971R, LOCK WASHERS-12H64R, SCREWS-21H962R, LOCK WASHERS-A765R, THROTTLE ADJUSTING SCREW-21H994R, THROTTLE SCREW SPRING-R10104R, BOWL GASKET-R10026R, BOWL NUT GASKET-R10014R, BOWL NUT GASKET-R10089R, CHOKE LEVER GASKET-R10090R, THROTTLE SHAFT PACKING-R10114R, FUEL STRAINER GASKET-R10025R, CHOKE COVER GASKET-R10093R, SEAT GASKET-R10172R, CARB TO MANIFOLD GASKET-D321R, CARB TO AIR INLET GASKET-D1034

————————————————————————-

ABC572 Economy Muffler Clamp

  • Fits Allis Chalmers: MODELS USING 1-3/4" CLAMP
  • Fits Avery: MODELS USING 1-3/4" CLAMP
  • Fits Case: MODELS USING 1-3/4" CLAMP
  • Fits Cockshutt: MODELS USING 1-3/4" CLAMP
  • Fits Ford: MODELS USING 1-3/4" CLAMP — — USE W/ FDS449, FDS450, FDS121 (1 END ONLY)
  • Fits International: MODELS USING 1-3/4" CLAMP
  • Fits John Deere: MODELS USING 1-3/4" CLAMP
  • Fits Massey Ferguson: MODELS USING 1-3/4" CLAMP
  • Fits Massey Harris: MODELS USING 1-3/4" CLAMP
  • Fits MM: MODELS USING 1-3/4" CLAMP
  • Fits Oliver: MODELS USING 1-3/4" CLAMP
  • Dimensions: 1-3/4"

    ————————————————————————-

    DEC456 MM Decal

  • Fits MM: TRACTORS & EQUIPMENT
  • Dimensions & Notes: 3" x 5"

    ————————————————————————-

    DEC457 John Deere 2 Legged Leaping Deer Decal ‘Vinyl Cut’

    • Fits John Deere: TRACTORS & EQUIPMENT
    • Dimensions & Notes: 6”, YELLOW WITH BLACK DEER

    ————————————————————————-

    FDS494 Head Lite Reinforcement Washer Light

    • Fits Ford: 8N (1950 & UP), NAA, NAB, JUBILEE, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 740, 741, 771, 800, 811, 820, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2030, 2110, 2111, 2120, 2130, 3000, 3100, 3400, 3500, 4000, 4100, 4110, 4130, 4140, 4400, 5000, 5100, 5200
    • Dimensions: Gray Primer, 2-1/4" O.D. 1/2" Center hole
    • Replaces: FAA13102A

    ————————————————————————-

    ABC565 Restoration Quality Metal Sheathed Tachometer Cable

  • Fits Ford: NAA, JUBILEE, 501, 600, 700, 800, 900, 2000 + 400 SERIES (GAS / DIESEL) THRU 1964, 1801 SERIES; 4 CYL
  • Fits John Deere: 4030
  • Notes: METAL SHEATH / COVERING
  • Replaces: FORD: B9NN17365B — JD: AR60877

    ————————————————————————-

    MFS184 Hood Dog Leg (Side Panel) left

  • Fits Massey Ferguson: TO20, TO30
  • Notes: PRIMER,FIT TO TRACTOR BEFORE PAINTING
  • Dimensions: 16" LONG X 23-1/2" TALL
  • Replaces: 181704M91
  • Weekly Featured Products

    Every Friday Steiner Tractor Parts features 9 products on our home page. The featured products could be new products recently added to our line, product that has been out of stock for some time and is back on the shelves, or a 'product pick' that either Danny or Jenny feel should be brought to the attention of our customers. To view our featured products go to our home page at www.steinertractor.com or check here for our weekly updates.

    IHS973  IHS973 International Hood and Sheet Metal Retaining Shoulder Bolt Restoration Quality 9/16" Hex Head. Fits: International 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, Hydro 70, Hydro 86, Hydro 100 USA MADE — 5/16" DIAM x 11/16 Length Shoulder Bolt with 9/16" Hex Head Replaces: 373483R1, 385157R1

    MHS075  

    MHS075 Massey Harris – New Water Pump with Pulley Fits: Massey Harris 30

    JDS1065 

    JDS1065 Pony Motor Fuel Shut Off Valve at the Carburetor Fits: John Deere all with Pony Start DSL: 70, 720, 80, 820 Replaces: AF2153R, AR1128R

    ACS350 ACS350 Starter Handcrank w/ Spinner & Pin  Fits: Allis Chalmers B, C, CA — USA MADE, Primer / Black Ecoat

    JDS1069  JDS1069 Stainless Needle Float Valve Fits: John Deere Following Single Induction Carbs; A, AN, ANH, AW, AWH, AO, AR, AI, AOS, B, BN, BW, BNH, BO, BR, BI, G, GM, GW, GN, GH, GP, GPO, D, DI, 50 all fuel, 60 all fuel, w/ stationary engine — Carb Numbers: DLTX3, DLTX5, DLTX6, DLTX7, DLTX8, DLTX10, DLTX11, DLTX12, DLTX13, DLTX15, DLTX16, DLTX17, DLTX18, DLTX19, DLTX24, DLTX31, DLTX33, DLTX34, DLTX38, DLTX39, DLTX41, DLTX51, DLTX53, DLTX63, DLTX67, DLTX71, DLTX72, DLTX73 — Replaces: C2501R, X2653, 233-574, AR10113R, AR10077R

    Information regarding our Special Order John Deere Hoods

    We’ve noticed recently that many customers are searching for John Deere Hoods on our website. We’ve added a page to our site to help you to special order hoods for various John Deere tractors. We are still not able to take orders for the John Deere hoods through our normal shopping cart due to the delay in availability and the costs of shipping.  We want to make sure that our customers are well informed about the shipping and manufacturing time for these hoods before placing their order.  If you have any questions or would like to order one, please let us know.  If there is a hood for a John Deere model that isn’t listed on our special order page, please send us an inquiry. We’d be happy to check and see if we are able to locate it for you.  As always, thanks for your business!

    Correct John Deere Hood & Grille Fasteners

     We have been getting several calls lately regarding which hood and grille fastener to use for which tractor, so JR has kindly provided us with a reference sheet with the correct applications.

    JDS851 The JDS851 and JDS854 are listed on page 273 of our 2009 Steiner Tractor Parts catalog and fit the following:

    John Deere M, MC, MI, MT hood uses 6 each of JDS851 short studs and 2 each of JDS854 long studs (long studs are at the center of the hood).

    John Deere 40 standard up to SN: 69403,  40 Utility up to SN: 63119 and 40C hood uses 6 each of JDS851 short studs and 2 each of JDS854 long studs (long studs are at center of the hood).

    John Deere 40 High Crop, Trycycle, special, 2 Row Utility, standard up to SN: 69404 and up, and ustility SN: 63120 and up hood uses 6 each of JDS851 short studs and 2 each of JDS854 long studs (long studs are at center of the hood). Above 40 application grille uses 3 each of JDS851 short studs.

    John Deere 320 and 330 hood uses 6 each of JDS851 short studs and 2 each of JDS854 long studs (long studs are at the center of the hood). John Deere 320 and 330 grille use 3 each of JDS851 short studs.

    John Deere 420, 430 up to SN: 158074,  High Crop, Special Utility, Standard, Trycycle, Utility, Special & Row Crop utility hood uses 6 each of JDS851 short studs and 2 each of JDS854 long studs (long studs are used for the center of the hood).  Above mentioned John Deere 420 and 430 application grille uses 3 each of JDS851 short studs.

     John Deere 420, 430 up do SN: 158074, Crawler hood uses 6 each of JDS851 short studs and 2 each of JDS854 long studs. (long studs are at the center of the hood). John Deere 420 and 430 Crawler grille uses 2 each of JDS851 short studs and 1 each of M2135T stud (we do not carry) if the crawler is equipped with optional light. John Deere 420 and 430 Crawler grilles use 2 each of JDS851 short studs and 1 each of M2135T stud (we do not carry) unless the Crawler is equipped with the optional light guard bottom grille panel or crankshaft pump attachment then it uses 4 each of JDS851 short studs.

    John Deere 430 SN:158075 and up High Crop, Standard, Trycycle, Utility, and Row Crop Utility hood uses 6 each of JDS851 short studs and 2 each of JDS854 long studs. John Deere 430 grille SN:158075 and up uses 2 each of JDS851 short studs.

    John Deere 435 hood uses 2 each of JDS851 short studs.

    John Deere 435 grille uses 3 each of JDS851 short studs.

    John Deere 1010 up to SN:31000 rear engine panels uses 4 each of JDS851 short studs.

    John Deere 2010 up to SN:29000 uses 2 each of JDS851 short studs.