cap Archives - Antique Tractor Blog Skip to main content

How can I tell if I have a pressurized radiator?

IHS445

Many people ask how they can tell if their radiator is pressurized or not.

A PRESSURIZED radiator will have the retaining slots on the filler neck for the cap on the OUTSIDE of the neck.

A NON-PRESSURIZED radiator will have the slots on the filler neck for the cap on the INSIDE of the neck.

Good luck with your restoration project!

JR Roberts

Weekly Featured Products

IHS852 International Tilt Steering Wheel Cap

Fits International: FITS THE FOLLOWING WITH TILT WHEEL: 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2706, 2806

Replaces: 400220R1

————————————————————————-

IHS980 International Fuel Gauge w/ Sending Unit

Fits John Deere: 620, 630, 720, 730 GAS OR DSL WITH 12 Volt Electric Start

Replaces: Gauge: AF2721R & AR88048, SENDING UNIT: AF2173R

How do I test a fuel gauge?

————————————————————————-

ABC570 Economy Muffler Clamp

Fits Allis Chalmers, Avery, Case, Cockshutt, Ford, International, John Deere, Massey Ferguson, Massey Harris, Minneapolis Moline & Oliver: Models using 1-5/8" clamp

  • Ford:  — USE W/ FDS124, FDS121 (1 END ONLY)
  • Oliver — USE W/ OLS091
  • Dimensions: 1-5/8"

————————————————————————-

DEC454 Oliver Shield Decal

  • Fits Oliver: TRACTORS & EQUIPMENT
  • Dimensions & Notes: RED — 3"

 

————————————————————————-

DEC464 Case Eagle Decal

  • Fits Case: Tractors & Equipment
  • Dimensions: 6" Tall

 

 

————————————————————————-

FDS493 Ford Select-O-Speed Clutch Torque Limiter Disc

  • Fits Following Fords w/Select-O-Speed Transmission, 1959-1964: 611, 671, 681, 771, 811, 871, 881, 971, 981, 1811, 1871, 1881, 2000 (4 cyl), 2111, 4000 (4 cyl), 4121, 6000 (1961 & UP)

  • Dimensions: 7-1/4" O.D. 20 SPLINE — 1.080 SPLINE I.D.
  • Replaces: 313875, 313966, C0NN7A539B, C3NN7A539A & E8NN7A539AA

————————————————————————-

ACS357 Oil Pan Gasket

  • Fits Allis Chalmers: G & others with N62 Continental Engine
  • Fits Massey Harris: Pony & others with N62 Continental Engines
  • Replaces: Allis Chalmers: 800286
  • Replaces: Massey Harris: 1500077M1

————————————————————————-

IHS018 Back in Stock! Lower Radiator Housing

  • Fits International: CUB & CUB LOBOY
  • Replaces: International 350886R11

    ————————————————————————-

    JDS778 Fuel Gauge with Sending Unit

    • Fits John Deere: 620, 630, 720, 730 GAS OR DSL WITH 12 VOLT ELECTRIC START
    • Replaces: Gauge: AF2721R & AR88048 — Sending Unit: AF2173R
    • How do I test a fuel gauge?

    ————————————————————————-

  • Weekly Featured Products

    IHS374 International Light Bar Mounted Toolbox for Farmall H & M (andIHS374 Supers)—all matching parts available also (and for less than our competitors!)

    Fits International: H, M, MD, Super H, Super M, Super MD, Super MTA, MTA

    • Includes 2 IHS686 Brackets
    • Light bar mounted
    • Includes Lid Decal
    • Powder Coated

    Replaces: 999760R91

    ————————————————————————-

    ACS178 ACS178 Allis Chalmers Oil Fill Breather Cap Without Clip

    Fits:

    Allis Chalmers: B, IB, C, CA, Late WD, WF, WD45, WC, (on rocker arm cover) D10, D12, D14, D15, D17, 170, 175, 190XT, WC (on rocker arm cover), I-40, I-400, I-60, I-600

    Avery models

    Case: VAC, VAI, 200, 300, 300B, 310, 320B, 420B, 420 crawler, 430, 500B, 530, 600B, W3, W5, W5A loader

    MM models

    Other Info: AC Motors: (in cubic inches) 125 IN, 138 IN, 149 IN, 160 IN

    • 3-1/4" tall
    • "OIL" stamped into top
    • Includes Copper Filter Element
    • Ecoated Black
    • USA Made

    Replaces:

    AC: 203196, 205298, 200267

    Case: VT3545, A36608

    Weekly Featured Products

       Tips on How to Remove a Steering Wheel

    ————————————————————————-

    CKS090 Case Steering Wheel

    Fits Case: 430 (SN 8262800 – 8650135), 430CK, 470 (SN 8656925 & UP), 530 (SN 8262800 – 8650135), 530CK, 570 (SN 8656925 & UP), 1200, 1470, M570AT (Military)

    Other Info: Hydrostatic means that the orbit motor is directly under the wheel.

    Dimensions & Notes: 36 splines

    For models listed with hydrostatic steering 

    Replaces: A35602, A167345, A51214

    Customers desiring the lowest cost option for a steering wheel cap can make the CKS058 work on this steering wheel, you will have to wrap some electrical tape to get the proper fit.

    If you want the proper steering wheel cap, we have built the complimentary part CKS096.

     

    ————————————————————————

    IHS850 International Tilt Steering Wheel

    Fits the following with tilt wheel: 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100

    Dimensions & Notes: 36 splines and 7/8" shaft— for the IH models listed that use a tilt steering wheel

    Replaces: 400217R1

    Related parts:

     IHS852GK Tilt Steering Wheel Cap Gasket 

      IHS926 Knob for Tilt Steering Adjustment Lever

    ————————————————————————-

            Back In Stock! Improved Quality!

    IHS419 International Steering Wheel IHS419

    Fits International: Late 140, 240, 340, 300, 330, 400, 404 (manual steering), 504 (manual steering), 424 (manual steering), 444 (manual steering), 350, 450, 460, 560, 660, 3414, 4100, 4156, 4166, 4186, B414

    Other Info: Also fits Montgomery Ward tractors

    Dimensions & Notes: 18" diameter splined hub, 36 splines, 7/8" shaft, 3 covered to center spokes — like original, all new material, steel spokes

    Replaces: 366557R1

    Related part:

      ABC504 Steering Wheel Nut 

    ————————————————————————

    Back In Stock! Improved Quality! Fits JD New Generation

    Why is this wheel superior to other Aftermarket Steering wheels?

    LIKE ORIGINAL!

    JDS539 John Deere Steering Wheel

    Fits the following John Deere models with the side console: 1020, 1520, 1530, 2020, 2030, 2120, 2350, 2440 (up to SN 340999), 2520, 2630, 2640 (UP TO SN 340999), 3020 (SN 201000 & UP), 4030, 4040, 4050, 4230, 4250, 4320, 4430, 4450, 4630, 4650, 4850, 4640, 4650, 4840, 4850, 2550, 2750, 2950, 3150, 8430, 8440, 8450, 8640, 8650, 8630, 8850

    Dimensions: 16" Diameter, 7/8" Splined Hub, 36 Splines

    Notes: Dished, Shiny Finish, All new material, Steel Spokes

    Replaces: T22875 subs to AR78405 & AL28457

    Related Parts:

    JDS306 Serviceable Steering Wheel Cap

    JDS339 Manual Steering Wheel Cap

    JDS338 Power Steering Wheel Cap

    JDS337 Manual Steering Wheel Cap

    JDS340 Power Steering Wheel Cap

    ————————————————————————-

                           Back In Stock!

    IHS542 International Steering Wheel  – LIKE ORIGINAL

    Fits International: Tractors without tilt steering and with power steering: 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606 ,656, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 1568, 1586, 21026, 21256, 21456, 2400, 2404, 2424, 2444, 2500, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3588, 3688, 3788;

    Fits following with tilt steering:  786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 4210, 4230, 4240, 4386, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, C50, C60, C70, C80, C90, C100, Hydro 86, Hydro 186, Hydro 3488

    Case / IH 4210, 4230, 4240, 4366, 4386, 4568, 4586, 4786, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488;

    CASE C100, V50, C60, C70, C80, C90;

    Hydro 70, Hydro 84, Hydro 86, Hydro 100, Hydro 186 & Hydro 3488;

    Combines: 205, 315, 403, 403 Hillside, 453, 503, 615, 715, 815, 915, 1420, 1440 Axial-flow, 1460 Axial-flow, 1470 Hillside, 1480

    Axial-flow Windrowers: 275 self-propelled, 375

    Self-Propelled Cotton Pickers: 414, 415, 420, 422, 616, 622, 782

    Cotton Harvester: 95 finger head & 1400

    Notes: Hub is splined half way thru, NOT all the way thru the hub. 

    Dimensions: 36 Splines, 16" Diameter,  7/8" Shaft

    Notes: 3 covered to center spokes, All New Material, Steel Spokes

    Replaces: 385156R1

    Related Parts:

     ABC504 Steering Wheel Nut 

    IHS682 Rubber Dust Cover / Umbrella

    DEC522 Steering Wheel Cap (Decal) Insert

    ————————————————————————-

    Tips on How to Remove a Steering Wheel

    Hot Off the Truck! Old Abe Steering Wheel (Emblem) Cap

    Old Abe (the eagle) is always on top of the world with the Case A35603 three CKS096eagle steering wheel (emblem) cap. The (emblem) cap, order # CKS096, is chrome plated with a painted black background (and includes rubber o-ring).

    The CKS096 Fits: Case: 430 (SN 8262800-8650135), 430CK, 470 (SN 8656925 & up), 530 (SN 8262800-8650135), 530CK, 570 (SN 8656925 & up), 1200, 1470, M570AT (Military).

    Replaced CKS058 when 30 series Case used hydrostatic power steering.

    CKS096 Replaces: A35603

    CKS090 & 096  The CKS096 fits in the CKS090 Steering Wheel due this Spring.

    Hot Off the Truck – International Steering Wheel Cap

    IHS863 Just in, our highly anticipated IHS863 Steering Wheel Cap. The IHS863 fits the following Cub Lo-Boys: 154, 184, 185, Cub Cadet: 111, 1100 (SN: 400001 & up), 382, 482, 982 (SN: 665001 & up). The IHS863 also works with our steering wheel IHS860. IHS860 & 863

     

    Note, the cap is also serviceable for steering wheels with 2-1/2” center cap opening including the 284, 1100, 1872 & 2072.

    Replacement: 393157R2, 533742R1

    Dimensions: 2.511 O.D.